Materials
- Home
- Materials
Endless possibilities
PLASTICS
We treat a wide range of technopolymers to offer you all the possibilities available on the market. Our technical team can identify the most suitable solution for each project, based on the required performance and your needs.
Plastics
Stampiamo a iniezione utilizzando Poliammidi, Policarbonati, TPU molti altri.
Materie plastiche speciali
We meet the most specific and particular requirements by moulding highly technical materials such as polyetheretherketone (PEEK), liquid crystal polymers (LCP), materials with special fillers and more.
Design
Do you have a plastic product that you would like to optimise?
We analyse and study the best technical solution to perform the production.
HIGH PERFORMANCE
High-performance materials
Some product categories require the design and manufacture using plastics with special characteristics. Our expertise in this area and our technological infrastructure enables us to handle these raw materials in a cross-cutting, professional and high-quality manner. We create unique products using special materials, both in terms of technical characteristics and aesthetic performance. Our experience guarantees the highest quality result for our customers.
PEEK
Is a polymer characterised by: high mechanical performance, excellent chemical resistance, continuous use from 260 C to - 60 C.
LCP
Is a polymer used to fill very thin thicknesses, stable and precise dimensions, high rigidity, very high chemical resistance, continuous use up to 250 C.
PA612-CF30
Polyamide has greater dimensional stability than its classic variant.
PPSU
A thermoplastic material with excellent mechanical properties and chemical and thermal resistance.
PBT
A semi-crystalline thermoplastic material with excellent resistance to thermal deformation.
TPE/TPV/TPU
Thermoplastic elastomers are plastics with elastic properties similar to rubber.
PSU
Polysulfone is known for its high thermal and chemical resistance, transparency, and ability to withstand extreme environmental conditions without deteriorating. It is used in biomedical engineering, the chemical industry, electronics, and automotive.
PPS
Polyphenylenesulfure stands out for its high chemical resistance, thermal resistance, dimensional stability, and flame resistance. It is commonly used in the automotive, electronics, and chemical industries.
PPO
Polypheniloxide is distinguished by excellent thermal resistance, dimensional stability, chemical resistance, and electrical insulation properties. It is indicated in electronics, household appliances, automotive and industrial engineering industries.
Termoplastiche adatte a te
Standard materials and engineering
Each material has its specific characteristics and application: transparency, chemical resistance, rigidity, optical properties, UV resistance, different environmental conditions and much more. Share with us your needs, and we will guide you in the best choice; the materials below are part of our availability of plastics and rubber to produce products.
STIRENICHE:
- Polystyrene and Polystyrene (PS)
- Shockproof and medium polystyrene (HI-PS)
- Acrylonitrile styrene (SAN)
- Acrylonitrile-butadiene-styrene (ABS)
- Acrylonitrile-styrene-acrylate (ASA)
ACRYLIC
- Polymethylmethacrylate (PMMA)
POLYAMIDES:
- Polyamide 6 (PA6)
- Polyamide 6 30 (PA6. GF 30%)
- Poliammide 6 50 (PA6. GF 50%)
- Poliammide 66 (PA66)
- Polyamide 66 30 (PA66 GF 30%)
- Polyamide 66 50 (PA66 GF 50%)
- Polyamide 11 (PA11)
- Polyamide 46 (PA46)
- Polyamide 12 (PA12)
- Polyamide 9 (PA9)
POLYOLEFIN
- Low-density polyethylene (LDPE)
- High-density polyethylene (HDPE)
- Polypropylene (PP)
- Polypropylene + glass 30% (PPGR GF 30%)
ACETALICHE
- Polyoxymethylene (acetal) (POM)
GOMMA (TERPOLIMERI)
- Acrylonitrile styrene estereacrylic (ASA)
THERMOPLASTIC RUBBERS
- Vulcanised thermoplastics (TPV)
- Copolymers butadiene styrene (SEBS)
- Polyurethane (TPU)
- Thermoplastic Elastomer (TPE)
VINYL
- Ethylene-vinyl acetate (EVA)
- Flexible polyvinyl chloride (PVC)
- Rigid polyvinyl chloride (PVC)
- Polivinilidenfluoruro (PVDF)
POLYESTERS
- Polycarbonate (PC)
- Polycarbonate 30 (PC-GR GF 30%)
- Polycarbonate 50 (PC-GR GF 50%)
- Polyethylene terephthalate (PET)
- Polietilentereftalato 30 (PET-GR GF 30%)
- Polybutylterephthalate (PBT)
- Polibutilentereftalato 30 (PBT-GR GF 30%)
- Polibutilentereftalato 50 (PBT-GR GF 50%)
Some of our customers
Trust those who have chosen us
WRITE TO US
Get in touch with Akron
Fill in the following form to get in touch with our professionals. We will get back to you as soon as possible.